Network Camera User Manual
79
configure here.
4. Click Save to save and finish the settings.
Notes:
• A reboot is required for the settings to take effect.
• To lower the risk of information leakage, you are suggested to enable SNMP v3
instead of SNMP v1 or v2.
Configuring FTP Settings
Purpose:
You can configure the FTP/SFTP server related information to enable the uploading
of the captured pictures to the FTP/SFTP server. The captured pictures can be
triggered by events or a timing snapshot task.
Steps:
1. Enter the FTP Settings interface: Configuration > Network > Advanced
Settings > FTP.
FTP Settings
2. Select the FTP protocol.
To Next Page
Loading...
