EasyManuals Logo

HIKVISION DS-2CD1143G0-I User Manual

HIKVISION DS-2CD1143G0-I
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Network Camera User Manual
86
HTTPS Settings
Purpose:
HTTPS provides authentication of the web site and its associated web server, which
protects against Man-in-the-middle attacks.
Note:
For the camera that supports plug-in free live view, when you use HTTPS to visit
the camera, you should enable Websockets for live view. Go to Configuration >
Network > Advanced Settings > Network Service.
If HTTPS is enabled by default, the camera creates an unsigned certificate
automatically. When you visit the camera via HTTPS, the web browser will send
a notification about the certificate issue. Install a signed-certificate to the camera
to cancel the notification.
Steps:
1. Enter the HTTPS settings interface. Configuration > Network > Advanced
Settings > HTTPS.
2. Check Enable to access the camera via HTTP or HTTPS protocol.
3. Check Enable HTTPS Browsing to access the camera only via HTTPS protocol.
HTTPS Configuration Interface
4. Create the self-signed certificate or authorized certificate.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD1143G0-I and is the answer not in the manual?

HIKVISION DS-2CD1143G0-I Specifications

General IconGeneral
Video streamingYes
Total megapixels4 MP
Maximum resolution2560 x 1440 pixels
Image quality adjustmentBrightness, Contrast, DNR, Saturation, Sharpness
Video compression formatsH.264, H.264+, H.265, H.265+, M-JPEG
Supported graphics resolutions320 x 240, 640 x 360, 640 x 480 (VGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 2304 x 1296, 2560 x 1440
Sensor typeCMOS
Number of sensors-
Optical sensor size1/3 \
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
Maximum operating distance30 m
DC output current0.4 A
DC output voltage12
Power source typeDC, PoE
Power consumption (max)5 W
Power consumption (Power over Ethernet (PoE))7 W
IK codeIK10
Form factorDome
Mounting typeCeiling/wall
Product colorBlack, White
Housing materialMetal, Plastic
International Protection (IP) codeIP67
Pan range0 - 355 °
Tilt angle range0 - 70 °
Camera shutter speed1/3 - 1/100000 s
Minimum illumination0.01 lx
Field of view (FOV) angle117 °
LED typeIR
Infra-red wavelength850 nm
Wi-FiNo
Number of users32 user(s)
Networking standardsIEEE 802.3af
Ethernet interface type10 Gigabit Ethernet, 100 Gigabit Ethernet
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
Ethernet LAN (RJ-45) ports1
Operating temperature (T-T)-30 - 50 °C
Weight and Dimensions IconWeight and Dimensions
Width111 mm
Height82.4 mm
Weight410 g
Package weight610 g

Related product manuals