Network Dome Camera·Quick Start Guide
Fix Incline Mounting Bracket to Wall Figure 2-23
4. Unscrew the bubble of the camera.
5. (Optional) Insert the memory card to the camera, if your camera
supports memory card installation. Refer to Section 2.1.
6. Route the cables and fix the camera to the incline mounting
bracket with three supplied self-tapping screws.
Note:
If you install the camera in outdoor, install the waterproof jacket
to the network cable. See Section 2.4.
Fix the Camera to Wall Mounting Bracket Figure 2-24
To Next Page
Loading...
