Figure 3-19 Region of Interest(1)
Figure 3-20 Region of Interest (2)
Stream Type:
You can set the ROI function for main stream, sub-stream and third stream. Select a stream type and
then configure the ROI settings.
Fixed Region: The fixed region encoding is the ROI encoding for the manually configured area. And
you can choose the Image Quality Enhancing level for ROI encoding, and you can also name the ROI
area.
Steps:
1. Select a Region No..
2. Check the Enable checkbox under Fixed Region.
3. Select the region from the dropdown list for ROI settings. There are four fixed regions selectable.
To Next Page
Loading...
