HIKVISION DS-2TD2 Series User Manual

DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 14
Figure 1, Thermography Configuration Flow Chart
Refer to the Quick Start Guide for detailed installation information.
3.3 Automatic Thermography
Configure the temperature measurement parameters and temperature measurement rules. The device
can measure the actual temperature and output alarms when the temperature exceeds the alarm
threshold value.
3.3.1 Set Thermography Parameters
Configure the temperature measurement parameters.
Before You Start
Go to Configuration → System → Maintenance → VCA Resource Type, select Temperature Measurement +
Behavior Analysis.
1. Go to Configuration → Local, enable Display Temperature Info.

HIKVISION DS-2TD2 Series Specifications

General

Brand	HIKVISION
Model	DS-2TD2 Series
Category	Security Camera
Language	English