DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 37
Chapter 8 Live View
Introduction to live view parameters, function icons, and transmission parameters settings.
8.1 Live View Parameters
For multichannel devices, select the desired channel first before live view settings.
8.1.1 Window Division
• refers to 1 × 1 window division
• refers to 2 × 2 window division
• refers to 3 × 3 window division
• refers to 4 × 4 window division
8.1.2 Live View Stream Type
Select the live view stream type according to your needs. For detailed information about the stream type
selection, see Stream Type.
8.1.3 Enable and Disable Live View
Use this function to quickly enable or disable live view of all channels.
• Click to start live view of all channels.
• Click to stop live view of all channels.
8.1.4 Start Digital Zoom
It helps to see a detailed information of any region in the image.
1. Click to enable the digital zoom.
2. In live view image, drag the mouse to select the desired region.
3. Click in the live view image to go back to the original image.
8.1.5 View Previous/Next Page
When the number of channels surpasses that of the live view window divisions, this function can switch
live view among multiple channels.
Click to switch live view among multiple channels.
8.1.6 Full Screen
This function is used to view the image in full screen mode.
To Next Page
Loading...
Need help?
General
