HIKVISION DS-2TD2 Series - Set Global Size Filter

DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 27
• Restore Default: Click Restore to restore the parameters to the defaults.
• Restart VCA: Click Restart to restart the VCA function.
5.6 Set Global Size Filter
Targets larger or smaller than the set size range are filtered out. The setting is valid for all behavior
analysis rules.
1. Go to Configuration → Behavior Analysis → Advanced Configuration to enable the function.
2. Click to draw a maximum size frame on live image.
3. Click to draw a minimum size frame on live image.
4. Click Save.