DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 56
10.3.1 Capture Automatically
This function can capture pictures automatically during configured time periods.
Before You Start
If event-triggered capture is required, configure related linkage methods in event settings. See Event and
Alarm for settings.
1. Go to Configuration → Storage → Schedule Settings → Capture → Capture Parameters.
2. Set the capture type.
• Timing: Capture a picture at the configured time interval.
• Event-Triggered: Capture a picture when an event is triggered.
3. Set the Format, Resolution, Quality, Interval, and Capture Number.
4. Refer to Set Arming Schedule for configuring schedule time.
5. Click Save.
10.3.2 Capture Manually
1. Go to Configuration → Local.
2. Set the Image Format and saving path to for snapshots.
• JPEG: The picture size of this format is comparatively small, which is better for network
transmission.
• BMP: The picture is compressed with good quality.
3. Click Save.
4. Click in the live view or playback window to capture a picture manually.
10.3.3 View and Download Picture
You can search, view, and download pictures stored in the local or network storage.
1. Click Picture.
2. Select channel no.
3. Set search condition, and click Search. Matching pictures show in the file list.
4. Select the pictures, then click Download to download them.
Go to Configuration → Local, and click Save snapshots when playback to change the
saving path of pictures.
To Next Page
Loading...
