DS-2TD2xxx-xxxx/xx Thermal and Optical Bi-Spectrum Network Camera User Manual
UM DS-2TD2xx-xxxx/xx Thermal 072020NA 29
Figure 3, Set Rules
4. (Optional): Set the parameters for multiple areas by repeating the above steps.
6.1.2 Expert Mode
You can configure the motion detection parameters of the day/night switch according to actual needs.
1. Select expert mode in Configuration.
2. Set expert mode parameters.
• Day/Night Switch OFF: Day/night switch is disabled.
• Day/Night Auto-Switch: The system switches day/night mode automatically according to the
environment. It displays a colored image during the day and a black and white image at night.
• Day/Night Scheduled-Switch: The system switches day/night mode according to the schedule. It
switches to day mode during the set periods and switches to night mode during the other periods.
• Sensitivity: The higher the sensitivity value, the more sensitive the motion detection. If the
sensitivity is set to 0, motion detection and dynamic analysis do not take effect.
3. Select an Area and click Draw Area. Click and drag the mouse on the live video, then release the mouse
to finish drawing one area.
• Stop Drawing: Finish drawing one area.
• Clear All: Delete all the areas.
To Next Page
Loading...
