HIKVISION DS-3E1526P-EI User Manual

Figure 3-7 Port Details
Connecon Status
The connecon status of a port: Connected or Disconnected.
Port Status
Enable or disable a port. Ports are enabled by default.
Actual Rate/Duplex
The actual rate and duplex mode of a port.
Congured Rate/Duplex
The default value is Auto/Auto. You can select dierent
combinaons of rates and duplex modes as required.
Flow Control
Enabled by default. Flow control can eecvely reduce the
impact of large amounts of data on the network and maintain
the stability of the network.
PoE Power
You can view the whole device PoE power and peak PoE power in
last seven days of the switch. Click in the upper right corner of
the module to go to the PoE Management page for PoE funcon
conguraon.
Figure 3-8 PoE Power
Note
PoE power display is only available for switches supporng PoE.
3.3 Network Status
Network Monitoring allows you to view the same-LAN network
device informaon, MAC addresses learned by ports, port
stascs, and cable status.
Find Network Devices
Network Device Discovery is a funcon that automacally
detects transmission devices in the same LAN with the switch and
displays informaon about these devices. Go to Network
Monitoring → Network Device Discovery , and you can view the
device IP address, type, model, and serial No. of the network
device(s) found. You can also select a device and click
in the
Operaon column to go to the web conguraon page of the
device.
5

HIKVISION DS-3E1526P-EI Specifications

General

Brand	HIKVISION
Model	DS-3E1526P-EI
Category	Switch
Language	English