HIKVISION DS-7108HGHI-K1 User Manual

2.
Select Mode as Group.
3.
Select a group number.
4.
Select IP cameras to record on the HDD group.
Figure 6-30 Group
5.
Click Apply.
6.
Restart the video recorder to
acvate the new storage mode sengs.
7.
Aer restart, go to Conguraon → Record → Storage .
8.
Click of desired HDD to set the group.
9.
Select a group number for the current HDD.
10.
Click Apply.
Note
Regroup the cameras for HDD if the HDD group number is changed.
Congure HDD Quota
Each camera can be congured with an allocated quota for storing videos.
Steps
Note
This funcon is only available for certain models.
1.
Go to Conguraon → Record → Storage Mode .
2.
Set Mode as Quota.
3.
Select a camera to set quota in Camera.
4.
Enter the storage capacity in Record Capacity.
Digital Video Recorder User Manual
76

HIKVISION DS-7108HGHI-K1 Specifications

General

Audio system	2-way
Product color	White
Video streaming	Yes
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264, H.264+, H.265, H.265 Pro
Playback resolutions supported	1920 × 1080, 1280 × 1024, 1280 × 720, 1024 × 768
DC voltage	12 V
Power supply type	DC
Power consumption (typical)	17 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
BNC input ports	8
Video input channels	8 channels
USB 2.0 ports quantity	2
HDD interface	SATA
Maximum HDD capacity	4000 GB
Number of users	32 user(s)
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS

Weight and Dimensions

Width	200 mm
Height	45 mm
Weight	800 g