HIKVISION DS-7108HGHI-K1

Figure 6-31 Quota
Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5.
Click Apply.
6.
Restart the video recorder to acvate the new sengs.
6.5.5 Advanced
Sengs
Steps
1.
Go to
Conguraon → Record → Advanced .
2.
Congure the parameters as your desire.
Overwrite
●
Disable: When the HDD is full, video recorder will stop wring.
●
Enable: When hard drive is full, video record will connue to write new les by deleng the
oldest les.
Enable HDD Sleeping
HDDs which are free of working for a long me will turn into sleep status.
Save Camera VCA Data
Camera VCA data will be saved so that you can search it.
Note
Disabling Save Camera VCA Data will delete the exisng Dual-VCA and moon detecon
informaon, and stop analyzing and storing Dual-VCA and moon detecon informaon.
Alarm Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing alarm
informaon.
Digital Video Recorder User Manual
77