HIKVISION DS-7108HGHI-K1

Figure 6-9 Port Sengs
6.2.9 Hik-Connect
Go to Conguraon → Network → Plaorm Access . Refer to Hik-Connect for details.
6.2.10 Email
Go to Conguraon → Network → Email . Refer to Email for details.
6.3 Camera Management
6.3.1 Congure Signal Input
For certain digital video recorder models, you can congure the analog and IP signal input types.
Steps
1.
Go to Conguraon → Camera → Analog , or click Edit at the upper-right corner in
Conguraon → Camera → Camera .
2.
Select signal input type as HD/CVBS or IP.
HD/CVBS
Digital Video Recorder User Manual
48