HIKVISION DS-7108HGHI-K1 User Manual

Figure 5-9 Linkage Acons
2.
Set normal linkage acons, alarm output linkage acons, trigger channel, etc.
Alarm Pop-up Window
The local monitor will pop up the alarming channel image when an alarm is triggered. It
requires to select the alarming channel(s) in Trigger Channel.
Buzzer Alarm
It will trigger a buzzer beep when an alarm is triggered.
Nofy Surveillance Center
The device will send an excepon or alarm signal to the remote client soware when an
alarm is triggered.
Send Email
It will send an email with alarm
informaon when an alarm is triggered.
PTZ Linkage
It will trigger PTZ acons (e.g., call preset/patrol/paern) when smart events occur.
Audio and Light Alarm Linkage
For certain network cameras, you can set the alarm linkage acon as audio alarm or light
alarm.
Note
●
Ensure your camera supports audio and light alarm linkage.
●
Ensure the audio output and volume are properly congured.
●
If you require to set audio and light parameters, please log into the network camera via
web browser to
congure them.
3.
Click Apply.
5.5
Congure Arming Schedule
Steps
1.
Select Arming Schedule.
Digital Video Recorder User Manual
29

HIKVISION DS-7108HGHI-K1 Specifications

General

Audio system	2-way
Product color	White
Video streaming	Yes
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264, H.264+, H.265, H.265 Pro
Playback resolutions supported	1920 × 1080, 1280 × 1024, 1280 × 720, 1024 × 768
DC voltage	12 V
Power supply type	DC
Power consumption (typical)	17 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
BNC input ports	8
Video input channels	8 channels
USB 2.0 ports quantity	2
HDD interface	SATA
Maximum HDD capacity	4000 GB
Number of users	32 user(s)
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS

Weight and Dimensions

Width	200 mm
Height	45 mm
Weight	800 g