HIKVISION DS-7108HGHI-K1 User Manual

Set Password Reseng Email
When you forgot your login paern and password, the device will send an email contains
vericaon code to your email for password reseng.
Steps
1.
Go to Conguraon → System → User .
2.
Click Password Reseng Email.
3.
Enter admin password for
authorizaon.
4.
Enter an email address.
5.
Click OK.
Reset Password
You can reset your password when you forgot your login paern and password.
Steps
1.
Click Forgot Password at the password login interface.
2.
Click Next if you agree the Privacy Policy, you can scan the QR code to read it.
3.
Follow the wizard to reset password.
5.1.3
Excepon
You can receive excepon events hint in alarm center, and set excepon linkage acons.
Steps
1.
Go to
Conguraon → System → Excepon .
2.
Oponal: Congure event hint. When the set events occur, you will receive hints in alarm center.
1) Enable Event Hint.
2) Click
at the upper-right corner of local menu to enter alarm center.
3) Select an event type.
4) Click Set to select events to hint.
3.
Set
Excepon Type
4.
Select Normal Linkage and Trigger Alarm Output type for
excepon linkage acons.
Digital Video Recorder User Manual
19

HIKVISION DS-7108HGHI-K1 Specifications

General

Audio system	2-way
Product color	White
Video streaming	Yes
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264, H.264+, H.265, H.265 Pro
Playback resolutions supported	1920 × 1080, 1280 × 1024, 1280 × 720, 1024 × 768
DC voltage	12 V
Power supply type	DC
Power consumption (typical)	17 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
BNC input ports	8
Video input channels	8 channels
USB 2.0 ports quantity	2
HDD interface	SATA
Maximum HDD capacity	4000 GB
Number of users	32 user(s)
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS

Weight and Dimensions

Width	200 mm
Height	45 mm
Weight	800 g