HIKVISION DS-7108HGHI-K1 User Manual

Add Network Camera Manually
Before You Start
●
Ensure your network camera is on the same network segment with that of your video recorder.
●
Ensure the network connecon is valid and correct.
●
Ensure the network camera is
acvated.
Steps
1.
Go to
Conguraon → Camera → IP Camera .
2.
Click in Added Device List.
3.
Set network camera parameters, including IP address, protocol, management port, etc.
4.
Oponal: Double click Camera Name to edit name.
Note
Camera name can be edited only when the camera status is online.
5.
Oponal: Enable Use Camera Acvaon Password to use the device password to add network
camera(s).
6.
Oponal: Click Add More to add another network camera.
7.
Click Add.
Figure 5-7 Add Network Camera
Digital Video Recorder User Manual
26

HIKVISION DS-7108HGHI-K1 Specifications

General

Audio system	2-way
Product color	White
Video streaming	Yes
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264, H.264+, H.265, H.265 Pro
Playback resolutions supported	1920 × 1080, 1280 × 1024, 1280 × 720, 1024 × 768
DC voltage	12 V
Power supply type	DC
Power consumption (typical)	17 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
BNC input ports	8
Video input channels	8 channels
USB 2.0 ports quantity	2
HDD interface	SATA
Maximum HDD capacity	4000 GB
Number of users	32 user(s)
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS

Weight and Dimensions

Width	200 mm
Height	45 mm
Weight	800 g