HIKVISION DS-7108HGHI-K1

Video Tampering
Trigger alarm when the lens is covered and take alarm response acons.
Steps
1.
Go to Conguraon → Event → Normal Event → Video Tampering .
Figure 6-17 Video Tampering
2.
Set Camera.
3.
Turn on Enable.
4.
Adjust
Sensivity as your desire. The higher the value is, the more easily the video tampering
can be triggered.
5.
Set the arming schedule. Refer to
Congure Arming Schedule for details.
6.
Set the linkage
acons. Refer to Congure Alarm Linkage Acon for details.
7.
Click Apply.
Video Loss
Detect video loss of a camera and take alarm response acons.
Steps
1.
Go to
Conguraon → Event → Normal Event → Video Loss .
2.
Set Camera.
3.
Turn on Enable.
4.
Set the arming schedule. Refer to
Congure Arming Schedule for details.
5.
Set the linkage
acons. Refer to Congure Alarm Linkage Acon for details.
6.
Click Apply.
Digital Video Recorder User Manual
57