Network Video Recorder User Manual
58
Figure 4-29 HDD General
2. Click to edit the HDD you want to protect.
Figure 4-30 HDD General- Editing
Note
To edit HDD property, you need to set the storage mode of the HDD to Group.
3. Set the HDD property to Read-only.
4. Click OK to save settings and back to the upper level menu.
Note
● You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the
property to R/W.
● If there is only one HDD and is set to Read-only, the NVR can’t record any files. Only live view
mode is available.
● If you set the HDD to Read-only when the NVR is saving files in it, then the file will be saved in
next R/W HDD. If there is only one HDD, the recording will be stopped.
To Next Page
Loading...
