6.2 Upgrade
You can use this function to upgrade the firmware. Please confirm the language
is matched.
Press “Upgrade” icon, in the pop-up dialog, you can select either “FTP” or
“USB” upgrade mode. Shown as Fig.6.3 below
Fig. 6.3 Upgrade
If you select “FTP” mode, you will enter “FTP Upgrade” menu:
Fig. 6.4 FTP IP setup
Please Input the ftp server IP and press [ENTER] key. DVR will connect with
FTP server through network and download the firmware file.
If you select “USB” mode, please make sure you connect one USB flash memory
with DVR and the firmware file is in its root directory.
To Next Page
Loading...
