4.6 Manual Record
Note: The user must have the corresponding right, DVR has HDD and HDD has
been formatted already.
Manual record
In preview mode, press [REC] key, in the pop-up login dialog, select the name
and input the correct password, you can enter the “Manual Record” interface.
In menu mode, press [REC] key to enter the “Manual Record” interface directly.
Fig. 4.8 Manual record interface
Description
Manual record interface has follows parts: channel number, channel status,
start/stop record, start all and stop all buttons.
Channel: List the channel number DVR has.
Status: Channel work status has 4 cases: means idle. Green means the
channel is recording (including real time recording, alarm recording, motion detection
recording). Red means network transmission. Orange means both recording and
network transmission.
Start/Stop: “” means you can start corresponding channel recording. “×”
means you can stop recording.
Start All: Press this button to start all channels recording.
Stop All: Press this button to stop all channel recording.
Press [ESC] key to enter the preview mode. Press [MENU] key to enter main
menu. Press [PLAY] key to enter the playback menu. Press [PTZ] key to enter the
PTZ control mode.
To Next Page
Loading...
