Reboot after successfully upgrading, the system will use the new firmware.
6.3 Hard Disk Management
Fig. 6.5 Hard Disk setup
Check HDD work status
Capacity, Free space, Stand by or not, Normal status or not.
Format HDD
Before formatting stop all recording. After formatting, you must reboot DVR;
otherwise DVR will not work normally.
6.4 Stop Alarm Out
Clear the alarm output manually.
6.5 Reboot
Reboot DVR.
6.6 Power off
Shut down DVR.
6.7 View Log
To view the log recorded in DVR HDD.
To Next Page
Loading...
