Fig. 4.6 Modify user’s password
Step 3: Input new password
Use numeric keys to input new password. The password can be null. It also can
be 16 numerals. Press [ENTER] to exit edit box, and move to “Verify” item to verify
password.
Note: In edit box, use []/ [] to move cursor and [EDIT] key to delete the
numeral in front of the cursor.
Step 4: Modify password successfully
Move the “Active Frame” to “Confirm” button, press [ENTER] key. If the
password is modified successfully, you will turn to the main menu. Or an error dialog
will pop up. You can repeat step 3 to modify again.
4.5 PTZ Control
Note: The user must have the “PTZ control” right.
PTZ control interface
In menu mode, press [PTZ] key, you can enter the PTZ control interface directly.
In preview mode, press [PTZ] key, in the login dialog, select one user name and
input the correct password, you can enter PTZ control interface. As shown in Fig.4.7
below.
To Next Page
Loading...
Need help?
General