HIKVISION DS-7204HI-S Series - Chapter 5 Parameters Setup Guide; 5.1 Administrator and Password

31
Chapter5 Parameters Setup Guide
Only the users who have “Parameters Setup” right need to read this chapter.
When the following parameters are modified and saved, you must reboot the DVR to
make the new parameters become effective. Others do not need to reboot the device.
 Any network parameters
 resolution and record schedule
 External alarm sensor type
 View tampering alarm schedule
 Video loss alarm schedule
 Motion detection alarm schedule
 External alarm schedule
 Alarm output schedule
5.1 Administrator and Password
When DVR is left from factory, there is one default administrator. The name is
“admin” and password is “12345”. The name can not be changed, while the password
can be modified.
Password modification
Press[MENU]key, in the login dialog, select the username as “admin”,
use[→]key, move cursor to password edit box, input “12345”, press “Confirm” to
enter the administrator menu.
Fig. 5.1 Enter user menu
Move “Active Frame” to “User” icon, press [ENTER] key to enter “User
Management” menu. Shown as Fig.5.2 below