Fig 4.12 Playback list
tep 3: Select backup device
emory, USB HDD, USB
e.
tton and press【ENTER】key to start backup.
You also can backup the image segments when the image is being playback. The
steps are:
After you select all segments, press【ESC】key, a message window will
pop-up. If you press “Confirm” button, DVR will start to backup the selected
segments. If you press “Cancel” button, DVR will abort backup.
Playback the video segment
You can use our file player software to playback the video segment in PC. You
can find the player software in attached CD.
Exit playback interface
Please refer to chapter 4.6.
S
Please confirm the backup device: USB flash m
CD-R/W, and select the corresponding backup devic
Step 4: Start and finish backup
Move “Active Frame” to “Save” bu
When backup is started, corresponding message box will pop-up to indicate the
result.
Backup video segment
1) Enter into the interface of playback the files or playback by time;
2) Press【EDIT】key to start selecting the current playback image, and press
【EDIT】again to stop selecting. This segment is selected;
3) You can repeat step 2 to select many segments. 30 segments can be selected
in all;
4)
31
To Next Page
Loading...
Need help?
General