“Schedule” button to enter into recording schedule menu.
Step 2: Select one day and disable all day recording option
For “Day” item, there are options: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
and Sunday. Use【↑】【↓】keys to select one day. Move “Active Frame” to the check box on the
right side of “All Day” item, press【ENTER】or【EDIT】key to disable “All Day” option. “×”
means disable and “9” means enable.
Step 3: Setup time period and record type
There are 4 time periods for one day, and each time period can select different record type.
Input start time and stop time for each time period, and select record type for each period. The
record type options are: All Time, Motion Detect, Alarm, Motion&Alarm and Motion|Alarm,
command.
Note: The time periods in one day can not be repeat.
Step 4: Copy to other days
You can repeat step2 and step3 to setup for other days. Also you can copy the current day to
other days.
Step 5: Save
Press “Confirm” back to “Recording” menu. Press “Confirm” again to save the parameters
and return main menu.
Note
er related types, you must setup “Alarms” in order to
igger alarm recording (refer to chapter 5.13).
3) ong 00:00—24:00.
arm Input and Relay Output
rm in and 1 relay out. In “Alarms” menu, you can setup for each
exter
menu, move “Active Frame” to “Alarms” icon and press【ENTER】key to enter into
larms menu: Shown as fig 5.22
:
1) If record type is “Motion Detect” or other related types, you must setup “Motion
Detection” in order to trigger motion recording (refer to chapter 5.10).
2) If record type is “Alarm” or oth
tr
The time period is am
5.13 External Al
For DS-7204 , there are 4 ala
nal alarm input.
In main
a
62
To Next Page
Loading...
