Chapter5 Parameters Setup Guide
ed to read this chapter. When
e following parameters are modified and saved, you must reboot the DVR to make
the new parameters take into effective. Other parameters do not need to reboot.
z Any network parameters
z resolution and record schedule
z External alarm sensor type
z View tampering alarm schedule
z Video lost alarm schedule
z Motion detection alarm schedule
z External alarm schedule
z Alarm output schedule
5.1 Administrator and Password
When DVR is left from factory, there is one default administrator. The name is
“admin” and password is “12345”. The name can not be changed, while the password
can be.
Password modification
Press【MENU】key, in the login dialog, select the username as “admin”, use【→】
key, move cursor to password edit box, input “12345”, press “Confirm” to enter into
administrator menu.
Only the users that have “Parameters Setup” right ne
th
33
To Next Page
Loading...
Need help?
General