Chapter2 Installation
Warning: Before you install the DVR, please make sure the power of DVR is
switched off.
2.1 Checking the DVR and Its Accessories
When you get the product, check that all the items are included in your product
package. There is a list in the package. If any of the items is missing, please contact
your dealer.
2.2 HDD Installation
Installation notice
The DVR has not HDD when leaving factory. Based on the record schedule, you
can calculate the total capacity you need (refer to Appendix A). Please ask the
specialist to disassembly the DVR and install HDD.
Installation instrument
One cross screw driver.
HDD installation
1. Open the DVR box.
2. Place the HDD on the mounting plate.
3. Connect the ATA data cable correctly. The cable has three connectors for
DVR main board, master HDD and slaver HDD.
4. Plug the HDD power connector.
5. Cover and fix the DVR box.
Note: After you install the HDD, you must format them. Please refer to
section 6.4.
6
To Next Page
Loading...
Need help?
General