Fig 5.6 Set user right
Operational rights are divided into “Local” and “Remote”. You can assign the
nece
the right to that user.
Step 4: Save the new user’s password and rights
In the “User Management” menu, press “Confirm” button, the user’s password
and rights will be saved and return main menu. If you press “Cancel” button, the
configuration will be abandoned.
User rights description
“Local”:
Local rights are for local operation, such as the operation using front panel, IR
controller and RS-485 keyboard.
PTZ control: Locally control PTZ;
Record: Manual start/stop recording;
Set parameters Setup: Locally setup the DVR parameters;
Log: Locally view the log on DVR;
Utilities: Locally upgrade firmware, format HDD, reboot DVR and shut down
DVR, etc.
“Remote”:
ssary rights to the user. Use【Æ】【Å】key to move “Active Frame” to the
corresponding right items, press【ENTER】or【EDIT】key to enable or disable the item.
“9” means assigning
38
To Next Page
Loading...
Need help?
General