“Active Frame” to “Position” button, press【ENTER】to enter into camera name
ce, you can use【È】【Ç】【Æ】
fixed, press
【ENTER】and return “Camera” menu, and press “Confirm” button to save it. In the
mod
For our embedded DVRDVS, it
includes displaying system time and camera name.
OSD settings include: System time, time format, time display position, camera
name, camera name display position, etc.
System Time
In “Display” menu, you can setup DVR system date and time.
Move your active frame to “Date/Time setup” item, and press enter.
Date Display Mode: Move the active frame to Date Display Mode then press
【EDIT】 then use【↑】【↓】key to select OSD format. There are following OSD
formats:
MM DD YY
MM DD YY
YY MM DD
YY MM DD Here YY means year, MM means month, DD means day.
You can also enable DST (Daylight-saving Time) function here. Shown as fig
5.10
position setup interface, as picture below in that interfa
【Å】keys to move camera name position. When the position is
“Image Setup” menu, press “Cancel” button or【ESC】key, you can abort the
ification.
OSD is abbreviation of “On Screen Display”.
Fig 5.10 Date
OSD Position
/time setup
Date
44
To Next Page
Loading...
