HIKVISION DS-7204HI series - Page 74

Please make sure the PTZ you are using can support sequence function.
tem, you can enter into
Cruise” setup menu: Shown as fig 5.32
Cruise setup
In “PTZ” menu, press “Setup” button on the right side of “Cruise” i
“
Fig 5.32 Cruise setup
Press “RecCru” button, you will enter into “PTZ control” interface. You can start controlling
PTZ with direction keys, press【ENTER】to save the operation track and return “Cruise” setup
menu. Press “StartCru” button to repeat the PTZ track until you press “Stop” button.
Press “Return” button back to “ ress “Confirm” button to save
this c
PTZ” menu. In “PTZ” menu, p
ruise.
Please make sure the PTZ you are using can support cruise function.
74