Stream Type allows enable/disable the audio streaming from the cameras (if the camera does not have
audio capabilities, then the Stream Type will only have Video option)
Resolution allows setting of the recording resolution
Bitrate Type allows the NVR to save HDD space when set to Variable (Available choses: Variable
and Constant)
Video Quality adjusts picture clarity (medium setting (3 green squares) is recommended. Medium
setting is the balance between good picture and saving HDD space).
Frame Rate allows setting of the recording frame rate (12-15 fps is recommended to save HDD space
and not to have a “choppy” image)
Max Bitrate Mode allows choosing between preset bitrate values and customizing the values
(General setting is recommended)
Max Bitrate (KBPS) is the chosen bitrate for streaming the video
Max Bitrate Recommended is the NVR’s recommended bitrate according to the parameters set
above.
Record Audio allows turning the audio recording on or off (this option is only available if the camera
has a microphone connected to it, or only the analog channels 1-4 on the hybrid NVR).
Video Stream allows changing the recording stream between Main Stream and Sub Stream (this step
requires a restart).
Please refer to the table below for recommended recording parameters
To Next Page
Loading...
Need help?
General
