HIKVISION DS-7608NXI-K2/8P - 6.2.9 OTAP Service

The plaorm server IP address.
Server Port
The plaorm server port, ranges from 1024 to 65535. The actual port shall be provided by
the plaorm.
Device ID
The Device ID shall be provided by the plaorm.
Version
ISUP protocol version, only V5.0 is available.
Encrypon Password
Encrypon password is required when using ISUP V5.0 version, it provides more secure
communicaon between the device and plaorm. Enter it for vericaon aer the device is
registered to the ISUP plaorm.
5.
Click Apply to save the sengs and restart the device.
What to do next
You can see the online status (online or oine) aer the device is restarted.
6.2.9 OTAP Service
Steps
1.
Go to
Conguraon → Network → Plaorm Access .
2.
Set Type as OTAP Service.
3.
Turn on Enable.
Note
Enabling OTAP service will disable other plaorm access.
4.
Set the related parameters.
Server Address
The plaorm server IP address.
Port
The plaorm server port ranges from 1 to 65535. The default value is 7800. The actual port
shall be provided by the
plaorm.
Device ID
The Device ID shall be provided by the device.
Key
The key is used for vericaon when the server receives the registraon informaon. 6 to 12
characters are allowed for the key. The default key is abc12345.
5.
Click Apply to save the
sengs and restart the device.
Network Video Recorder User Manual
49