HIKVISION DS-8600 User Manual

User Manual of Network Video Recorder
220
Figure 14. 20 Copy Settings to Other Camera(s)
6. Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of IP
Camera to select all cameras.
7. Click the OK button to finish the Copy settings and back to the Storage Mode interface.
8. Click the Apply button to apply the settings.
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record and picture
capture.

HIKVISION DS-8600 Specifications

General

Brand	HIKVISION
Model	DS-8600
Category	Network Hardware
Language	English