User Manual of Network Video Recorder
36
Figure 2. 8 Array Management
6. Click Next button to enter the Array Management window.
Figure 2. 9 Array Management
7. Click Next button after you configured the network parameters, which takes you to the HDD Management
window, shown in Figure 2. 10.
Figure 2. 10 HDD Management
8. To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD.
9. Click Next button. You enter the Adding IP Camera interface.
10. Click Search to search the online IP Camera and the Security status shows whether it is active or inactive.
To Next Page
Loading...
Need help?
General
