User Manual of DS-9600/8600/7700/7600 Series NVR
39
2. Click apply to save the settings and click OK to exit the editing interface.
To edit more parameters:
1. Click the Advance Set icon.
Figure 2. 15 Network Configuration of the Camera
2. You can edit the network information and the password of the camera.
Figure 2. 16 Password Configuration of the Camera
3. Click Apply to save the settings and click OK to exit the interface.
Explanation of the icons
Configuring the customized protocols
Purpose: To connect the network cameras which are not configured with the standard protocols, you can configure
the customized protocols for them.
Steps:
1. Click the Protocol button to enter the protocol management interface.
To Next Page
Loading...
