Network Video Recorder User Manual
110
11. Set linkage actions. Refer to Configure Linkage Actions.
12. Click Apply.
6.4 Human Body Detection
6.4.1 Human Body Detection
The human body detection enables to detect the human body appearing in the monitoring scene,
and capture the human body pictures.
Before You Start
The connected camera supports the human body detection.
Steps
1. Go to Smart Analysis ā Smart Event Settings ā Other Events.
2. Select a camera.
3. Click Human Body.
4. Check Save VCA Picture to save the captured pictures of human body detection.
5. Check Target of Interest (Human Body) to discard non-human body pictures and videos which
are not triggered by human body detection. The feature is only available for local human body
detection.
6. Set detection area.
To Next Page
Loading...
Need help?
General
