Network Video Recorder User Manual
133
Steps
1. Go to Storage → Storage Management → SSD Management.
2. Click Firmware Upgrade.
3. Select Device Name as the USB flash drive that contains the SSD firmware.
4. Select the SSD firmware.
5. Click Upgrade.
9.2 Manage Local HDD
9.2.1 Configure HDD Group
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings.
Steps
1. Go to Storage → Storage Mode.
2. Select Mode as Group.
3. Click Apply.
4. Go to Storage → Storage Device.
5. Select a HDD.
Figure 9-1 Storage Device
6. Click to enter Local HDD Settings interface.
To Next Page
Loading...
Need help?
General
