HIKVISION DS-9600NXI-I8/S Series User Manual

Network Video Recorder User Manual
10
Figure 1-9 Remote Control
1.3.2 Unpair (Disable) an IR Remote from a NVR
To unpair an IR Remote from a NVR so that the unit cannot control any NVR functions, proceed as
follows: Press the DEV key on the IR Remote. Any existing Device ID# will be erased from the unit’s
memory and it will no longer function with the NVR.
Note
(Re)-enabling the IR Remote requires pairing to a NVR. See “Pair the IR Remote to a Specific NVR
(optional)” above.
The keys on the remote control closely resemble the ones on the front panel.
Table 1-1 IR Remote Description
No.
Name
FunctionDescription
1
POWER ON/OFF
To Turn Power On:
If User Has Not Changed the Default NVR Device ID#
(255):
1. Press Power On/Off button (1).

HIKVISION DS-9600NXI-I8/S Series Specifications

General

Brand	HIKVISION
Model	DS-9600NXI-I8/S Series
Category	Network Hardware
Language	English