Each disk will allocate a certain space to store logs. Old logs will be
overwritten when the space is full.
You can set Log Storage Period or allocate Log Disk for log storage.
When logs exceed the period, the historical logs cannot be searched.
3. Click Apply.
14.7.2 Search & Export Log Files
The device operation, alarm, exception, and information can be stored in log files, which can be
viewed and exported at any time.
Steps
1. Go to Maintenance ā Log Information.
Figure 14-14 Log Search Interface
2. Set the log search conditions, including the time, major type and minor type.
3. Click Search to start searching the log files.
4. The matched log files will be displayed on the list, as shown below.
Figure 14-15 Log Search Results
Note
Up to 2,000 log files can be displayed each time.
5. Related Operation:
To Next Page
Loading...
Need help?
General
