Network Video Recorder User Manual
215
Only the admin user account has the permission of restoring factory default parameters.
16.4.2 Deleting a User
Steps:
1. Enter the User Management interface.
Menu >Configuration>User
2. Select the user to be deleted from the list, as shown in Figure 16. 8.
Figure 16. 8 User List
3. Click the icon to delete the selected user account.
16.4.3 Editing a User
For the added user accounts, you can edit the parameters.
Steps:
1. Enter the User Management interface.
Menu > Configuration > User
2. Select the user to be edited from the list, as shown in Figure 16. 8.
3. Click the icon to enter the Edit User interface, as shown in Figure 16. 10.
To Next Page
Loading...
