HIKVISION DS-A80 Series Quick Operation Guide

Quick Operation Guide of DS-A81 Series Storage System
18
3. Select the bonding mode from the drop-down list to meet the actual needs, and then click
OK to save the settings.
Figure 4. 4 Modify NIC Bonding Mode
Restart the system after the NIC bonding mode is modified to activate the new settings.
4.2.3 Configuring Multi-NIC Bonding
Purpose:
Multi-NIC bonding is supported by the storage system, to realize the functionalities such as data
transmission bandwidth expansion, fault-tolerance, flow control, etc. Only the data NICs can be
Steps:
1. On the Network Management interface, select the NICs from the NIC List for bonding.
Figure 4. 5 NIC Information
2. Click Create Bonding in the NIC information field, and a dialog box pops up.
Figure 4. 6 Bond Selected NICs
3. Click OK to confirm the settings. It takes a few seconds to bond the selected NICs, and a
message box will pop up after the NIC bonding is complete.
 Please stop the data access to the storage system during NIC bonding process in case of data loss.
 The IP address of the first data NIC will be adopted for the bond
4.2.4 Deleting Multi-NIC Bonding
Steps:

HIKVISION DS-A80 Series Specifications

General

Brand	HIKVISION
Model	DS-A80 Series
Category	Storage
Language	English