HIKVISION DS-A80 Series Quick Operation Guide

Quick Operation Guide of DS-A81 Series Storage System
44
error. You will be prompted to replace this non-rebuilt disk in the operation log after the array
rebuilding is complete, to avoid data loss and enhance the data security.
Steps:
1. Click Storage > Settings to enter the device settings interface,
2. Click the Open button to enable the Force-rebuild function.
Figure 6. 23 Enable Force-rebuild
6.3.3 Array Verification
Purpose:
Array verification function helps to avoid the data error and file loss in the data storage process.
A regular check and maintenance for the disk array is recommended, thus to ensure the high
stability and security of the data stored in the array.
There are 2 types of verification modes available: checking the array and repairing the array.
Array verification may bring some pressure on the system and cause an effect to the
performance of the current business.
Checking the Array
 Checking Array Manually
Steps:
1. Click Storage > Array to enter the array management interface.
2. When the array state is Normal, click Maintain to enter the array maintenance interface.

HIKVISION DS-A80 Series Specifications

General

Brand	HIKVISION
Model	DS-A80 Series
Category	Storage
Language	English