Quick Operation Guide of DS-A81 Series Storage System
50
Select the physical volume, click Position under the Physical Volume List, and you can positioning
all the disks in the selected physical volume.
Click the Delete button above the Physical Volume List, and you can delete the virtual storage
pool from the storage system.
Click the Position button above the Physical Volume List, and you can positioning all the disks in
the virtual storage pool.
To positioning a disk, the indicator on the HDD bay bracket flickers for notification.
6.4.2 Creating LUNs
Purpose:
After physical volumes are added into the virtual storage pool, you can partition the volume
space and create some logic volumes (LUNs) to be assigned to NAS, iSCSI, CVR and other storage
service, to take highly use of the storage space.
Steps:
1. Enter the LUN Management interface.
Storage > LUN
Figure 6. 35 LUN Management Interface
2. Click the Create button to open the Create LUN page.
Figure 6. 36 Create a LUN
3. Input the LUN name, LUN size and block size in the corresponding text fields.
To Next Page
Loading...
Need help?
General
