HIKVISION DS-K1T501SF

Video Access Control Terminal·User Manual
128
Playing Back Video Files
After searching the recordings triggered by the event, you can play back the video files in the
following two ways:
 Playback by File List
Select the video file from the search result list, and then click the icon in the toolbar, or
click the icon on the video file, or double-click the video file to play the video on the
corresponding display window of playback.
 Playback by Timeline
The timeline indicates the time duration for the video file. Click on the timeline to play back
the video of the specific time.
You can click or to scale up or scale down the timeline bar.
You can drag the timeline bar to go to the previous or the next time period.
You can use the mouse wheel to zoom in or zoom out on the timeline.
Event Playback Toolbar:
On the Remote Playback page, the following toolbar buttons are available:
Reverse Playback
Play back the video file reversely.
Pause/Start Playback
Pause/Start the playback of the video files.
Stop Playback
Stop the playback of all cameras.
Single Frame (Reverse)
Play back the video files frame by frame reversely.
Single Frame
Play back the video files frame by frame.
Previous Event
Go to the playback of the previous event.
Next Event
Go to the playback of the next event.
Slow Forward/Fast
Forward
Decrease/Increase the play speed of the playback.
Volume
Click to turn on/off the audio and adjust the audio
volume.