HIKVISION DS-K1T604M - Page 27

Face Recognition Terminal User Manual
27
supplement light, supplement IR light brightness, and supplement light brightness, and auto
enable supplement light threshold.
Parameter
Description
Floor + Building No.
Set the device floor and building information.
Voice Prompt
Tap or to disable or enable the voice promt.
Voice Volume
Adjust the voice volume. The larger the value, the louder the volume.
Read CPU File
If the device supports swiping CPU card, you can enable the function and
the device can read the CPU card information.
Auto Enable
Supplement Light
If enabling the function, when it is too dark, the device will auto open the
supplement light.
If disabling the function, the supplement light will be remaining open.
Supplement IR Light
Brightness
Set the IR light when the IR light is enabled.
Supplement Light
Brightness
Set the supplement light’s brightness. The brightness ranges from 0 to
100.
0 refers to turning off the light. 1 refers to the darkest, and 100 refers to
the brightest.
Auto Enable
Supplement Light
Brightness Threshold
The supplement light will be enabled automatically when the actual
illumination value is less than the configured one.