EasyManuals Logo

HIKVISION DS-K1T642MFW User Manual

HIKVISION DS-K1T642MFW
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #156 background imageLoading...
Page #156 background image
Steps
1.
Click Access Control → Advanced Funcon Authencaon .
2.
Select an access control device (support the funcon of person authencaon) on the le panel
to enter the person
Authencaon Mode page.
3.
Click Add to enter the Add window.
4.
Select the person(s) need to be congured on the le panel.
The selected person(s) will be added to the right panel.
5.
Select the authencaon mode on the drop-down list of Authencaon Mode.
6.
Click OK.
Figure 9-12 Set Authencaon Modes for Persons
7.
Oponal: Select person(s) on the Person Authencaon mode page, and then click Apply to
apply the person authencaon mode to the device.
Note
Person authencaon has higher priority than other authencaon mode. When the access
control device has been congured person authencaon mode, the person should authencate
on this device via person authencaon mode.
9.7.6 Congure Card Reader Authencaon Mode and Schedule
You can set the passing rules for the card reader of the access control device according to your
actual needs.
Steps
1.
Click Access Control → Advanced
Funcon Authencaon to enter the authencaon mode
conguraon page.
2.
Select a card reader on the
le to congure.
3.
Set card reader authencaon mode.
1) Click Conguraon.
Face Recognion Terminal User Manual
140

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T642MFW and is the answer not in the manual?

HIKVISION DS-K1T642MFW Specifications

General IconGeneral
Type-
Log capacity150000
Product colorBlack
Cards capacity10000 cards
RFID frequency13.56 MHz
Languages supportARA, ENG, ESP, THA, POR, RUS, VIE
Recommended usageIndoor
Fingerprint readerYes
Authentication typeAccess chip/card, Biometric, Face recognition
Access chip/card reader typeContactless
RS-485 ports1
Cabling technology10/100/1000
Supported network protocolsISUP 5.0, ISAPI, NetSDK, HikCentral Pro OpenAPI, Hik-ProConnect OpenAPI
Display diagonal4.3 \
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)0 - 90 %
Total megapixels2 MP
Front camera typeDual camera
Viewing angle, vertical75.5 °
Viewing angle, horizontal41.5 °
Weight and Dimensions IconWeight and Dimensions
Depth20 mm
Width118 mm

Related product manuals