EasyManuals Logo

HIKVISION DS-K1T642MFW User Manual

HIKVISION DS-K1T642MFW
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #174 background imageLoading...
Page #174 background image
9.10.3 Search Historical Events
You can search and view historical events by seng search condions such as me, device type,
and priority in the client. For the searched events, you can handle and export them.
Before You Start
Enable receiving events from devices before the client can receive event
informaon from the
device,see Enable Receiving Event from Devices for details.
Steps
1.
Click Event Center → Event Search to enter the event search page.
2.
Set the
lter condions to display the required events only.
Time
The
me when the event starts.
Search by
Device
Search the events by device or the device's resource channels. If searched by device, you
need to set the followings:
Include Sub-Node: Search the events of the device and all resource channels.
Device Type: Select the device from which you want to search events.
Group
Search the events by resource channels in the group.
Note
For video intercom device, you need to select search scope: All and Locking Log.
For access control device, you can click Show More to set more condions: status, event
type, card reader type, person name, card No., and organizaon.
Priority
The priority including low, medium, high and uncategorized which indicates the emergency
degree of the event.
Event Type
Select one or more event types to be searched from the drop-down list.
Note
You can enter a key word (supports fuzzy search) in the search box to search the target event
type(s).
Status
The handling status of the event.
Search by Keyword
Face Recognion Terminal User Manual
158

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T642MFW and is the answer not in the manual?

HIKVISION DS-K1T642MFW Specifications

General IconGeneral
Type-
Log capacity150000
Product colorBlack
Cards capacity10000 cards
RFID frequency13.56 MHz
Languages supportARA, ENG, ESP, THA, POR, RUS, VIE
Recommended usageIndoor
Fingerprint readerYes
Authentication typeAccess chip/card, Biometric, Face recognition
Access chip/card reader typeContactless
RS-485 ports1
Cabling technology10/100/1000
Supported network protocolsISUP 5.0, ISAPI, NetSDK, HikCentral Pro OpenAPI, Hik-ProConnect OpenAPI
Display diagonal4.3 \
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)0 - 90 %
Total megapixels2 MP
Front camera typeDual camera
Viewing angle, vertical75.5 °
Viewing angle, horizontal41.5 °
Weight and Dimensions IconWeight and Dimensions
Depth20 mm
Width118 mm

Related product manuals