EasyManuals Logo

HIKVISION DS-K1T642MFW User Manual

HIKVISION DS-K1T642MFW
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
7.11.4 Call Room from Device
Steps
1.
Get the client
soware from the supplied disk or the ocial website, and install the soware
according to the prompts.
2.
Run the client soware and the control panel of the soware pops up.
3.
Click Device Management to enter the Device Management interface.
4.
Add the indoor
staon and the device to the client soware.
Note
For details about adding device, see Add Device.
5.
Link a user to an indoor staon and set a room No. for the indoor staon.
6.
Call the room.
-
If you have congured a specied room No. in the Basic Sengs , you can tap to call the
room.
-
If you have not
congured a specied room No. in the Basic Sengs , you should tap on
the
authencaon page of the device. Enter the room No. on the dial page and tap to call
the room.
7.
Aer the indoor staon answers the call, you can start two-way audio with the indoor staon.
7.11.5 Call Mobile Client from Device
Steps
1.
Get the mobile mobile client from the supplied disk or the ocial website, and install the
soware according to the prompts.
2.
Run the mobile client and add the device to the mobile client.
Note
For details, see the user manual of the mobile client.
3.
Enter Basic Sengs → Shortcut Key and enable Call APP.
4.
Go back to the
inial page and call the mobile client.
1) Tap on the device inial page.
2) Tap
to call the mobile client.
Face Recognion Terminal User Manual
62

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T642MFW and is the answer not in the manual?

HIKVISION DS-K1T642MFW Specifications

General IconGeneral
Type-
Log capacity150000
Product colorBlack
Cards capacity10000 cards
RFID frequency13.56 MHz
Languages supportARA, ENG, ESP, THA, POR, RUS, VIE
Recommended usageIndoor
Fingerprint readerYes
Authentication typeAccess chip/card, Biometric, Face recognition
Access chip/card reader typeContactless
RS-485 ports1
Cabling technology10/100/1000
Supported network protocolsISUP 5.0, ISAPI, NetSDK, HikCentral Pro OpenAPI, Hik-ProConnect OpenAPI
Display diagonal4.3 \
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)0 - 90 %
Total megapixels2 MP
Front camera typeDual camera
Viewing angle, vertical75.5 °
Viewing angle, horizontal41.5 °
Weight and Dimensions IconWeight and Dimensions
Depth20 mm
Width118 mm

Related product manuals