Specify the seconds that the call with indoor staon will last for at most. The maximum
speaking duraon between indoor staon and the client can be set from 120s to 600s.
Max. Speaking Duraon with Door Staon
Specify the seconds that the call with door staon will last for at most. The maximum
speaking duraon between door staon and the client can be set from 90s to 120s.
Max. Speaking Duraon with Access Control Device
Specify the seconds that the call with access control device will last for at most. The
maximum speaking
duraon between access control device and the client can be set from
90s to 120s.
4.
Click Save.
9.12.5 Set File Saving Path
The pictures captured in Status Monitoring module are stored on the local PC. The saving path of
these les can be set.
Steps
1.
Open the System Conguraon page.
2.
Click File tab to enter the File Saving Path
Sengs page.
3.
Click and select a local path for the les.
4.
Click Save.
9.12.6 Set Email Parameters
When an event is triggered, if you can set Send Email as linkage acon for this event, the client will
an email to the recipients for
nocaon. You need to set the email sengs and specify target
recipients in this secon.
Steps
1.
Enter the System Conguraon module.
2.
Click Email tab to enter the Email
Sengs interface.
3.
Enter the required informaon.
STMP Server
The STMP server IP address of host name (e.g., smtp.263xmail.com)
Encrypon Type
You can check the radio to select Non-Encrypted, SSL, or STARTTLS .
Port
Enter the communicaon port used for SMTP. The port is 25 by default.
Sender Address
The email address of the sender.
Face Recognion Terminal User Manual
187