HIKVISION DS-K1T805EBFWX - 7.4 Administrator Settings

Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's
me.
DST
Enable DST. Set the DST start me, end me and bias me.
Click Next to save the sengs and go to the next parameter. Or click Skip to skip me sengs.
7.4 Administrator Sengs
Steps
1.
Click in the top right of the web page to enter the wizard page.
2.
Enter the employee ID and name of the administrator.
3.
Select a
credenal to add.
Note
You should select at least one credenal.
1) Click Add Card to enter the Card No. and select the property of the card.
Note
Up to 5 cards can be supported.
2) Click Add Fingerprint to add ngerprints.
Note
Up to 10 ngerprints are allowed.
4.
Click Complete.
Access Control Terminal User Manual
21